So aktivieren Sie 5.1-Sound

Wenn Sie über eine Soundkarte und Lautsprecher mit 5.1-Sound verfügen, kann dies über das mitgelieferte DirectSound-Ausgabe-Plugin aktiviert werden:

  1. Nehmen Sie in Windows die richtige Lautsprecherkonfiguration vor und stellen Sie die Hardwarebeschleunigung für Audio über die Windows-Systemsteuerung > Sounds und Audiogeräte > Lautsprechereinstellungen > Erweitert auf „Voll“ ein.
  2. Gehen Sie in die Systemsteuerung Ihrer Soundkarte und stellen Sie sicher, dass 5.1/7.1-Lautsprecher anstelle von Stereolautsprechern ausgewählt sind.
  3. Gehen Sie in MediaMonkey in den Hauptmenüs zu „Extras“ > „Optionen“ > „Ausgabe-Plugins“ und aktivieren Sie DirectSound als Ausgabe-Plugin, falls dies noch nicht geschehen ist.
  4. Klicken Sie auf die Schaltfläche „Konfigurieren“ , um das Plug-In zu konfigurieren und die Hardwarebeschleunigung zu aktivieren (in MediaMonkey 2.5 müssen Sie zur Registerkarte „Gerät“ wechseln).
  5. Stellen Sie sicher, dass Ihre Soundkarte/Ihr Soundchip als Ausgabegerät ausgewählt ist.
    Alle Änderungen werden nach einem Neustart der Wiedergabe wirksam.

Hinweis: Wenn das Kontrollkästchen „Hardwarebeschleunigung“ in MediaMonkey 2.5 ausgegraut ist, stellen Sie sicher, dass die Soundkartentreiber auf dem neuesten Stand sind.

Wenn das nicht funktioniert, versuchen Sie, unter folgender Adresse auf die neueste Version von DirectX zu aktualisieren:
http://www.microsoft.com/windows/directx/default.mspx

Versuchen Sie bei Creative SB Live- und Audigy-Soundkarten, CMSS in der EAX-Systemsteuerung zu aktivieren, und denken Sie daran, den Schieberegler „Vorne/Hinten“ nach unten zu bewegen (z. B. von 100 % auf 0 %).

Wenn das immer noch nicht funktioniert, können Sie die folgenden alternativen Ausgabe-Plugins ausprobieren (ungetestet):
o https://sourceforge.net/projects/winampmatrixmix/files/WinampMatrixMixer/matrixmixer_0_9_163d/
o https://www.softpedia.com/get/Multimedia/Audio/Audio-Plugins/Wave-5point1-Output.shtml

Gilt für: ,

Translated automatically (see original)

How to Enable 5.1 Sound

If you have a soundcard and speakers capable of 5.1 sound, this can be enabled via the included DirectSound output plugin:

  1. Set the correct speaker setup configuration in Windows, and set hardware acceleration for audio to ‘full’ via Windows Control Panel > Sounds and audio devices > Speaker settings > Advanced)
  2. Go into your soundcard’s control panel and make sure 5.1/7.1 speakers are selected instead of stereo speakers.
  3. In MediaMonkey, go to Tools > Options > Output Plug-ins from the Main Menus and enable DirectSound as the output plug-in if it isn’t already.
  4. Click the Configure button to configure the plugin and enable hardware acceleration (in MediaMonkey 2.5 you’ll need to switch to the ‘Device’ tab).
  5. Make sure your sound card/chip is selected as the Output Device.
    Any changes will take effect after playback is restarted.

Note: If the ‘hardware acceleration’ checkbox is greyed out in MediaMonkey 2.5, make sure that the sound card drivers are up-to-date.

If that doesn’t work, try upgrading to the latest version of DirectX at:
http://www.microsoft.com/windows/directx/default.mspx

For Creative SB Live & Audigy sound cards, try enabling CMSS in the EAX Control Panel, and remember to move the Front/Rear slider down (e.g. from 100% to 0%).

If that still doesn’t work, you can try the following alternative output plugins (untested):
o https://sourceforge.net/projects/winampmatrixmix/files/WinampMatrixMixer/matrixmixer_0_9_163d/
o https://www.softpedia.com/get/Multimedia/Audio/Audio-Plugins/Wave-5point1-Output.shtml

Applies to: ,

Hide original

War dieser Beitrag hilfreich?