Installieren von Apple Sync-Treibern ohne iTunes

Für die Synchronisierung mit Apple iOS-Geräten benötigt MediaMonkey für Windows die neuesten Apple Mobile Device Drivers. Dies geschieht normalerweise durch die Installation der iTunes-Desktopversion. Wenn Sie iTunes jedoch nicht installieren möchten und technisch versiert sind, können Sie den Apple Mobile Device Driver und seine Dienste auch unabhängig von iTunes installieren. Beachten Sie, dass diese Methoden für die iOS-Synchronisierung nicht unterstützt werden, da sie möglicherweise nicht für alle Benutzer funktionieren.

Wenn Sie iTunes zuvor installiert/deinstalliert haben:

  1. Installieren Sie die Treiber von einer Restkopie der Treiber auf Ihrem Laufwerk C:
    • Navigieren Sie zu C:\Programme\Gemeinsame Dateien\Apple\Mobile Device Support\Treiber
    • Klicken Sie mit der rechten Maustaste auf usbaapl64.inf und klicken Sie auf „Installieren“.
  2. ODER: Installieren Sie die Treiber über den Geräte-Manager
    • Verbinden Sie Ihr iPhone/iPad
    • Klicken Sie auf die Windows-Startschaltfläche und führen Sie den „Geräte-Manager“ aus.
      • Klicken Sie auf Universal Serial Bus-Geräte/Controller und klicken Sie mit der rechten Maustaste auf die Apple Mobile USB-Geräte, um sie zu aktualisieren und zu aktivieren
      • ODER: Klicken Sie auf Tragbare Geräte > Apple iPhone und klicken Sie mit der rechten Maustaste auf „Aktualisieren und aktivieren“.

Wenn Sie iTunes noch nie installiert haben

  1. Installieren Sie die Treiber direkt von iTunes (ohne iTunes zu installieren)
    • Laden Sie die neueste Desktopversion von iTunes herunter ( 64-Bit-Version | 32-Bit-Version ).
    • Laden Sie ein Programm herunter und installieren Sie es, das eine CAB-Datei öffnen und Inhalte daraus extrahieren kann, beispielsweise 7-zip oder WinRar .
    • Überprüfen Sie den Inhalt des iTunes-Installationsprogramms iTunes64Setup.exe oder iTunesSetup.exe (das Sie in Schritt 1 heruntergeladen haben) mit 7-zip (Rechtsklick, 7-zip, Archiv öffnen). 7-zip zeigt die Dateien im Installationsprogramm an.
    • Extrahieren Sie AppleMobileDeviceSupport64.msi oder AppleMobileDeviceSupport.msi aus der Installationsdatei auf Ihre Festplatte.
    • Führen Sie AppleMobileDeviceSupport64.msi oder AppleMobileDeviceSupport.msi aus
    • Nachdem die Unterstützung für Apple-Mobilgeräte installiert wurde, verbinden Sie Ihr iOS-Gerät mit Ihrem PC. Windows sollte es dann korrekt erkennen können.
    • Starten Sie MediaMonkey und Ihr Apple-Gerät wird erkannt, sodass Sie MediaMonkey für Windows zum Synchronisieren mit dem Gerät verwenden können.
  2. ODER installieren Sie die Treiber ohne iTunes mithilfe einer Drittanbieter-App (beachten Sie, dass diese von Apple oder MediaMonkey nicht unterstützt werden). Mögliche Optionen sind:

Unabhängig davon, welchen Ansatz Sie wählen, wird das Gerät in Windows erst dann sichtbar, wenn Sie beim Verbinden auf die Geräteaufforderung reagieren und diesem Computer „vertrauen“ .

Gilt für: ,

Translated automatically (see original)

Installing Apple Sync Drivers without iTunes

To Sync with Apple iOS devices, MediaMonkey for Windows requires the latest Apple Mobile Device Drivers to be installed. This is normally done by installing the iTunes desktop version, but if you prefer not to install iTunes, and are technically inclined, you can install the Apple Mobile Device Driver and its services independently of iTunes using a number of approaches. Note that these approaches aren’t supported for iOS synchronization as they may not work for all users.

If you’ve previously installed/uninstalled iTunes:

  1. Install the drivers from a residual copy of the drivers on your C: drive
    • Navigate to C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    • Right-click on usbaapl64.inf and click ‘Install’
  2. OR, Install the drivers using the device manager
    • Connect your iPhone/iPad
    • Click the Windows Start button and run the ‘Device Manager’
      • Click Universal Serial Bus devices/controllers and right-click on the Apple Mobile USB Devices to Update & Enable them
      • OR, Click Portable devices > Apple iPhone and right-click to Update & Enable it

If you’ve never installed iTunes

  1. Install the drivers directly from iTunes (without installing iTunes)
    • Download the latest desktop version of iTunes ( 64-bit version | 32-bit version ).
    • Download and install a program that can open and extract contents from a CAB file such as 7-zip or WinRar .
    • Inspect the content of the iTunes installer iTunes64Setup.exe or iTunesSetup.exe (that you downloaded in step 1) with 7-zip (right click, 7-zip, Open archive). 7-zip will show the files inside the installer.
    • Extract AppleMobileDeviceSupport64.msi or AppleMobileDeviceSupport.msi from the installer file to your harddisk.
    • Run AppleMobileDeviceSupport64.msi or AppleMobileDeviceSupport.msi
    • After Apple Mobile Device Support have been installed, connect your iOS device to your PC and Windows should be able to detect it correctly.
    • Start MediaMonkey and your Apple device will be detected, so that you can use MediaMonkey for Windows to Sync to the device.
  2. OR install the drivers without installing iTunes using a third party app (note that these aren’t supported by Apple or MediaMonkey). Possible options are:

Whichever approach you take, the device will not be visible in Windows until you respond to the device prompt to ‘Trust’ this computer when you connect it.

Applies to: ,

Hide original

War dieser Beitrag hilfreich?