Einige/alle MP3s werden nicht abgespielt

MediaMonkey 3.x und 4.x enthalten MP3-Plugins (in_dsmp3.dll bzw. in_wmp3.dll), die es MediaMonkey ermöglichen, den MP3-Codec von Windows zum Abspielen von MP3-Dateien zu verwenden. Obwohl dies normalerweise problemlos funktioniert, gibt es mehrere Fälle, in denen die MP3-Wiedergabe fehlschlagen kann:

  1. MP3-Dateien mit fehlerhaften CRCs oder anderweitig beschädigte Dateien. In solchen Fällen können Sie versuchen, ein alternatives MP3-Plugin zu verwenden, wie beispielsweise:
    in_mad.dll: Dieses Plug-in ist ein hervorragendes Plug-in, insbesondere wenn Sie eine Audiokarte mit einer Audioauflösung von 24 Bit oder mehr haben, aber die Entwicklung dieses Plug-ins ist nicht mehr aktiv. Es kann auch über die MediaMonkey Input Plug-ins-Seite bezogen werden:
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll: Dieses Plug-in gilt als qualitativ hochwertiges Plug-in und Streaming-Inkompatibilitäten mit MediaMonkey wurden behoben, es wird jedoch nicht mehr aktiv weiterentwickelt.
    Es ist zu finden unter: http://otachan.com/in_!mpg123.html

    Wenn Sie die standardmäßigen MP3-Eingabe-Plug-Ins durch eines der oben genannten ersetzen, achten Sie darauf, die aktuellen Plug-Ins zu entfernen oder zu deaktivieren (ändern Sie beispielsweise in_wmp3.dll in in_wmp3.dll.off).

    Hinweis: Wenn Sie überprüfen möchten, ob eine MP3 beschädigt ist, und/oder diese reparieren möchten, können die folgenden Tools von Drittanbietern hilfreich sein:
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Dateien haben eine falsche Erweiterung. Beispielsweise wird mp2-Dateien manchmal fälschlicherweise die Erweiterung mp3 zugewiesen. Für solche Dateien sollten Sie die Erweiterung in mp2 ändern und den mp2-Codec installieren:
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. Wenn Sie eine Windows-Version ohne Windows Media Player und gültige Codecs haben, werden keine Audiodateien abgespielt. Um dieses Problem zu beheben, müssen Sie die fehlenden Codecs installieren .
  4. Wenn Windows Media Foundation und Audio System Services beschädigt sind (dies wurde bei einigen Upgrades auf Windows 10 beobachtet), können keine Audiodateien abgespielt werden. So beheben Sie das Problem: a) Überprüfen Sie mit REGEDIT, dass der Schlüssel „DependOnService“ von „KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\“ nur „AudioEndpointBuilder RpcSs“ enthält und _keine_ Zeile mit „MMCSS“. Wenn doch, löschen Sie diese und starten Sie das System neu. b) Verwenden Sie in der Eingabeaufforderung den Befehl „sfc /scannow“, um sowohl die Dienste „Windows Audio“ als auch „Windows Audio Enpoint Builder“ zu reparieren, falls sie fehlen oder beschädigte Einstellungen haben. c) Installieren Sie den Soundkartentreiber neu. Deinstallieren Sie den vorhandenen -> Starten Sie das System neu -> Lassen Sie Windows die Standardinstallation durchführen oder installieren Sie den neuesten Treiber des Soundkarten-Chipsatzherstellers (Realtek, C-Media, Connexant, …)
  5. In manchen Fällen kann es auch sein, dass Codecs installiert sind, diese aber falsch konfiguriert sind. Hier ist ein Link zu einem kurzen Tutorial zum Reparieren von Windows-Codecs: http://www.looprecorder.de/tut_l3codec.php

Gilt für:

Translated automatically (see original)

Some / All MP3s Don’t Play

MediaMonkey 3.x and 4.x include MP3 plugins (in_dsmp3.dll and in_wmp3.dll respectively) that allow MediaMonkey to use Windows’ MP3 codec to play MP3 files. Although this normally works without a problem, there are several cases in which MP3 playback can fail:

  1. MP3 files with bad CRCs or otherwise damaged files. In such cases, you can try using an alternative MP3 plugin such as:
    in_mad.dll: This plug-in is an excellent plug-in especially if you have an audio card capable of 24-bit+ audio resolution, but development of this plug-in is no longer active. It can also be obtained via the MediaMonkey Input Plug-ins page:
    http://www.mediamonkey.com/addons/browse/item/mad-input-plugin/

    in_mpg123.dll: This plug-in is considered to be a high-quality plug-in, and streaming incompatibilities with MediaMonkey have been resolved, however, it is no longer actively developed.
    It can be found at: http://otachan.com/in_!mpg123.html

    If you replace the default MP3 Input-Plug-ins with either of the above, make certain to remove or disable the current plug-ins (e.g. change in_wmp3.dll to in_wmp3.dll.off).

    Note: If you want to verify whether an MP3 is damaged, and/or fix them, the following third party tools may be helpful:
    http://www.gromkov.com/faq/repair/mp3_validator.html
    http://www.happymonkeying.com/eSupport/vbrfix.zip
  2. Files have an incorrect extension. For example, mp2 files are sometimes incorrectly assigned an mp3 extension. For such files, you should change the extension to mp2 and install the mp2 codec:
    http://www.mediamonkey.com/addons/browse/item/mp2/
  3. If you have a version of Windows that doesn’t come with Windows Media Player and valid Codecs, then no audio files will play. To resolve, you’ll need to install the missing codecs.
  4. If Windows Media Foundation and Audio System Services have been corrupted (this has been observed on some upgrades to Windows 10), then all audio files will fail to play. To fix this: a) Using REGEDIT, verify that “KEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Audiosrv\” Key “DependOnService” contains only “AudioEndpointBuilder RpcSs” and does _not_ contain a line with “MMCSS”. If it does, delete it and restart the system b) From the command prompt, use the “sfc /scannow” command to fix both “Windows Audio” and “Windows Audio Enpoint Builder” services if they are missing or have corrupted settings. c) Reinstall the Sound card driver. Uninstall existing -> Restart System -> Let Windows install default or install latest one from sound card chipset manufacturer (Realtek, C-Media, Connexant, …)
  5. In some cases, it may also be that codecs are installed, but that they are misconfigured. Here is a link to a brief tutorial re. fixing Windows Codecs: http://www.looprecorder.de/tut_l3codec.php

Applies to:

Hide original

War dieser Beitrag hilfreich?